Description
This kit provides everything needed to upgrade your MacBook Air’s WiFi card enabling a number of unsupported features (Including Handoff, and Continuity Apple Watch Unlocking and faster 802.11ac WiFi Speeds 867 Mbps ) Using a BCM94360CS2.
Compatibility
- 11inch MacBook Air A1370 (Late 2010,Mid 2011)
- 11inch MacBook Air A1465 (Mid 2012)
- 13inch MacBook Air A1369 (Late 2010,Mid 2011)
- 13inch MacBook Air A1466 (Mid 2012)
MacBook Air WiFi Upgrade Compatibility
The Kit consists of :
- 3x custom antenna extensions (1 spare)
- Heat shrink for both the card and antenna extensions
- 3M VHB Tape
- BCM94360CS2
Compatibility
Installation
The installation is simple and the instructions can be found here.
FAQs
FAQs can be found here
Disclaimer
*The use of this adapter does not guarantee any features or long term availability of features, being available in the computer it is installed in*
***It is always good practice to back up your data and make sure your machine has been shut down properly before you start any work. This is a DIY unsupported modification to your Computer that you are undertaking at your own risk. intriguing industries will take no responsibly for any damage to your computer or data loss***
Designed and assembled in the U.K.
Brian Mwangi (verified owner) –
Never replaced a wifi card before, I’ve done a previous battery and SSD repair so still quite novice
repair time took approximately 1.5 hours for me
eventually got it working, but the fit took a while, as the first time it didn’t quite sit in its port correctly, and the antennae cables were fiddly
the only thing that would really improve this is a proper troubleshooting guide, frequent problems and how to fix them, as I was worried my system didn’t recognise the card initially. All working now so far
Jon –
Only one thing, the 3M heatshrink sleeve is very sensitive, use your hair dryer in its lowest setting, otherwise it works perfectly on my 2011 Ivy Bridge.